CCT 2017 Programme – Day 2
Wednesday the 10th of May 2017
Congress Hall T1
Congress Hall T1 | Congress Hall T3 | Congress Hall T4
Scott Smouse
US Department of Energy, USA
Partha Mazumder
General Manager (Coal Mining) NTPC, India
NEDO’s clean coal technology development for reduction of CO₂ emissions
Eiji Nishioka, New Energy and Industrial Technology Development Organization, Japan
Technical solutions for perspective IGCC
Tatiana Bogatova, Ural Federal University, Russia
Energy efficiency evaluation of Shell’s entrained flow gasifier by different coal ranks and Exergy analysis of IGCC with carbon capture
Chang-Ha Lee, Yonsei University, South Korea
Experimental investigation of alkali sorption with mineral getter materials for IGCC Power Plant
Florian Kerscher, TU München, Germany
Operational and strategic considerations for coal plants in the context of changing market design and growing renewable energy penetration
Ashutosh Shastri, EnerStrat Consulting, UK
Thermal power generations in India: The challenges from renewable energy source power generation
Avijit Mallick, Reliance Power Ltd, India
Consequences of the German energy transition on the operation regime and the availability of coalfired power plants
Oliver Then, VGB Powertech, Germany
HELE perspectives for selected Asian countries
Ian Barnes, IEA Clean Coal Centre, UK
Impacts of re-opening of Czech Brown coal mines on energy system and deep decarbonisation target
Lukáš Rečka, Charles University Environment Center, Czech Republic
State-of-the-art in supercritical CO2 power cycles
Qian Zhu, IEA Clean Coal Centre, UK
Techno-economic analysis of an integrated gasification direct-fired supercritical CO2 power cycle
Nathan Weiland, National Energy, Technology Laboratory, USA
Coal-fired power plant efficiency boost through retrofitting with supercritical CO₂ Brayton cycle
Huiqi Wang, EDF, China
Development of a mean-line model of axial supercritical CO₂ turbine
Yili Xiong, EDF, China
Liam McHugh – World Coal Association
Nick Butler – Kings College and Financial Times
Charles Soothill – Zero Emissions Platform
Chandra Bhushan – CSE India
Craig Morris – Institute for Advanced Sustainability Studies
Alessandro Lanza – Sotacarbo
Congress Hall T3
Congress Hall T1 | Congress Hall T3 | Congress Hall T4
The research and development of CFB coal combustion in China
Guangxi Yue, Tsinghua University, China
Development of advanced CFB technology in light of changing fuel trends
Kalle Nuortimo, Amec
Foster Wheeler Energia Oy, Finland
The formation of the fluidized bed hydrodynamic structure, optimal for burning of low-grade coals and biomass
Dmitry Klimov, Clean Energy Ltd,Russia
CFD simulation of binary particle mixing in a baffled downer reactor for coal topping
Nan Zhang, Institute of Process Engineering, Chinese Academy of Sciences, China
Research progress of mercury emission and control in China
Yongchun Zhao, Huazhong University of Science Technology, China
Control of mercury emissions – alternative methods
John Meier, Nalco Water, USA
Mercury removal and its fate in wet flue gas desulphurization slurry enhanced with reagents and without any treatment
Renata Krzyzynska, Wroclaw University of Technology, Poland
Mercury capture by a structured Au/C regenerable sorbent under oxycoal combustion conditions
M Teresa Izquierdo, Instituto de Carboquímica – CSIC, Spain
Multi-pollutant control using structured sorbent/catalyst modules
Jeff Kolde, Gore, USA
Simulation and cost analysis of structured adsorbent capture technology with advances in materials
Rebecca Gardiner, Inventys Inc.,Canada
Enhancement of CO₂ capture capacity of mesoporous sorbents via functionalization with an amino acid ionic liquid
Marco Balsamo, Università degli Studi di Napoli Federico II, Italy
Post-combustion CO₂ capture using N-(isopropyl)- tetraethylenepentamine-based solid sorbent
Hidetaka Yamada, Research Institute of Innovative Technology for the Earth (RITE), Japan
Ultra-thin zeolite membranes for gas separations
Jonas Hedlund, Luleå University of Technology, Sweden
Congress Hall T4
Congress Hall T1 | Congress Hall T3 | Congress Hall T4
The influence of discharge electrode geometry and the associated discharge characteristics on electrostatic precipitator performance
David Branken, North-West University, South Africa
Experimental study on combustion of gasification fly ash preheated by a CFB burner
Ziqu Ouyang, Institute of Engineering Thermophysics Chinese Academy of Sciences, China
Current Tools & Techniques for Maximizing Performance on Existing Electrostatic Precipitators (ESPs)
James J Ferrigan, Fuel Tech, USA
Particle matter filtration from iron-ore sintering flue gas in a magnetically stabilized fluidized bed
Yang Xu, Huazhong University of Science and Technology, China
Long-term pilot testing of the carbonate looping process in at 1 MWth scale
Jochen Hilz, Institute for Energy Systems and Technology (EST) – Technische Universität Darmstadt, Germany
Calcium looping combustion for high-efficiency low-emission power generation
Dawid Hanak, Cranfield University, UK
On the evaluation of ilmenite as an oxygen carrier for natural/synthesis gases in chemical-looping combustion
Yau-Pin Chyou, INER, Taiwan
Performance of CLOU process in the combustion of different types of coal with CO₂ capture with a Cu-Mn oxygen carrier
Iñaki Adánez-Rubio, Instituto de Carboquimica – CSIC, Spain
COMPOSITE Process: Highly efficient IGCC power generation with CO₂ capture by integration of CLAS and CLC
Yngve Larring, SINTEF, Norway
A closed carbon cycle through sector coupling? Challenges posed by path dependency in the socio-technical system
Roh Pin Lee, IEC, TU Bergakademie Freiberg, Germany
Social acceptance of clean coal mining and combustion
Vladimir Budinsky, SD Severoceske doly a.s., Czech Republic
UCG: supposed environmental issues – myths and realities
Chris Cuff, C&R Consulting, Australia