AUSC 3 PROGRAMME
13-14 DECEMBER 2017
DAY 1
Day 1 | Day 2
DP700-Phase 1 Preparation for Commercial Demonstration of 700°C Power Plant (25 Mins)
Peter Barnard (Doosan Babcock Ltd)
United States Advanced Ultra-Supercritical Component Test Facility for 760°C Steam Power Plants (25 Mins)
Horst Hack (Electric Power Research Institute)
Theoretical and practical residual stress analyses of nickel Waterwall Panel Welds (20 Mins)
André Hälsig (Technical University Chemnitz)
Creep-fatigue design for power plants (20 Mins)
Rami Pohja (VTT)
DP700-Phase 1 Design by Analysis as Applied to 700°C Power Plant (20 Min)
David Anderson (Doosan Babcock)
Cyclic & Monotonic Plasticity (20 Mins)
Indian AUSC Programme (20 Mins)
Nishikant Edkie (BHEL-AUSC)
Next stage of A-USC boiler development– Life evaluation and new material development (20 Mins)
Keiji Kubushiro (IHI Corporation)
The technology development of high efficiency 700°C class steam turbine (20 Mins)
Xin Wang (Dongfang Turbine Co.Ltd. )
Creep damage behaviour of 23Cr-45Ni-6W alloy thick welding component (20 Mins)
Keita Hashimoto (Mitsubishi Heavy Industries, Ltd.)
Creep assessment on pressurized components for USC plants (20 Mins)
Fireside Corrosion and Steam Oxidation in Superheater / Reheater Tubes for Advanced Ultra-Supercritical Power Systems (20 Mins)
Nigel Simms (Cranfield University)
Inspection of a 700°C power plant (20 Mins)
Arthur Stam (DEKRA)
Understanding microstructural evolution of Ni alloys during service and its effects on long-term properties (20 Mins)
Oriana Tassa (Rina Consulting – Centro Sviluppo Materiali Spa)
Collation of Existing Knowledge of materials used in A-HSC power plants (20 Mins)
Mohammad Reza Ahmadi (Technical University of Graz)
DAY 2
Day 1 | Day 2
Advanced – Ultra Super Critical (A-USC) Power Plant (25 Mins)
Amir Mujezinovic (General Electric Company)
Development and Prospect of Double Reheat Technology in China (20 Mins)
Wenkai LI (Electric Power Planning & Engineering Institute (China))
630-650 DG A-USC technology and material selection (20 Mins)
Yanyan Bi (Sandvik)
Thermodynamic assessment of liquid metal–steam USC binary plants to break 50% efficiency in pulverized coal plants (20 Mins)
Marco Astolfi (Politecnico di MIlano)
A New Milestone of Pingshan Phase II Coal Power Achieves Around 50% Net Efficiency with a 600°C Class Material (20 Mins)
Yan Cao (Shanghai Waigaoqiao No.3 Power Generation Co., Ltd.)
3D-modelling of the coal combustion process in combustion chamber of industrial boiler initiated by a plasma source (20 mins)
Valeriy Maximov (Al-Farabi Kazakh National University)
Predicting the impact of fuel flexibility by using integrated CFD/process modelling of an industrial scale coal-fired power plant. (20min)
Alastair Clements (Energy2050, Faculty of Engineering, University of Sheffield)
Strategies of Satisfying CO2 Emission Standards for Coal fired AUSC Units Without CCS (20 Mins)
Yongjian Ye (EAST CHINA ELECTICAL POWER DESIGN INSTITUTE LTD.)
Activity of microalgae biomass on improving the combustion of coal and reducing CO2 emission (20 Mins)
Vitus Obialo Ejesieme (Nelson Mandela University)
The Technology Development of high Efficiency 700℃ grade steam turbine
Dong Fang (Steam Turbine Co. Ltd.)